Spectrum Enterprises

Description

Ethylene detector-transmitter E2638-C2H4 is a member of new PluraSens® family of multifunctional measurement instruments.

Applications include chemical and polymer industry, agriculture, fruit storage and ripening and other areas requiring precise measurement of ethylene concentration.

The instrument utilises a fully calibrated and temperature compensated electrochemical gas sensor with excellent repeatability, stability and long lifetime. Due to a special technical solution for humidity compensation (available as an option), the detector may be used even at humidity levels up to 100% RH.

Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.

Volatile organic compounds detector-transmitter E2638-VOC is a member of new PluraSens® family of multifunctional measurement instruments which is intended for detection of various solvent vapors, e.g. toluene, xylene, ethanol.

Applications include storages, painting chambers and other areas, where toxic or potentially explosive concentration of volatile organic compounds can accumulate.

The instrument utilises a fully calibrated metal-oxide semiconductor gas sensor with excellent repeatability, stability and long lifetime.

According to user's preferences the detector can be ordered for either fire prevention (range 0...100% LEL) or for toxicity prevention (range 0...1000 ppm).

Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.

Gas Sensors, CMD SeriesItem CMD5B4110 CO detector, 5% electrochemical, Wall, selectable Ranges and outputs, LCD display, test switch, twoThe CMD Series carbon monoxide detector uses a superior electrochemical sensor for reliability and accuracy in even the most critical applications. The standard product features a 2 wire loop powered output. Optionally, the device may configure with an alarm relay which operates in 3 wire sourcing mode and/or with Modbus communications.

The EE800 is optimized for demand controlled ventilation and buildingautomation in residential and commercial applications.VersatileThe EE800 combines CO2, temperature (T) and relative humidity (RH)measurement in one device with modern design. Additionally, itcalculates the dew point temperature (Td).Outstanding Measurement PerformanceThe EE800 incorporates the E+E dual wavelength NDIR CO2 sensor,which compensates for ageing effects, is highly insensitive to pollutionand offers outstanding long term stability. A multiple point CO2 and Tfactory adjustment procedure leads to excellent CO2 measurementaccuracy over the entire T working range.Analogue Outputs, Digital Interface, DisplayEE800 features analogue outputs or RS485 interface. At the EE800 with RS485 additional physical quantities areavailable via Modbus RTU or BACnet MS/TP: absolute humidity, mixing ratio, enthalpy, frost point temperature and watervapor partial pressure. The optional display shows the measured values alternately.Easy Installation and MaintenanceThe EE800 enclosure is available in two sizes according to regional standards.The snap-on design facilitates the replacement of the active front part within seconds while the wiring remains intact.Furthermore, it makes possible to wire the device without exposing the electronics to construction site pollution.Configurable and AdjustableAn optional USB configuration adapter and the free EE-PCS Product Configuration Software facilitate easy setup andadjustment of EE800.

Certainly! Let's create a similar description for the Hydrogen Sulfide Detector Transmitter:

---

Welcome to Spectrum Instruments & Controls, your premier supplier of cutting-edge Hydrogen Sulfide Detector Transmitters. We are dedicated to providing advanced safety solutions in key cities across India and expanding our footprint to various countries in the Middle East and South Asia.

**Cities We Serve in India:**

1. **Mumbai:** Supplier of Hydrogen Sulfide Detector Transmitter
2. **Delhi:** Supplier of Hydrogen Sulfide Detector Transmitter
3. **Bangalore:** Supplier of Hydrogen Sulfide Detector Transmitter
4. **Chennai:** Supplier of Hydrogen Sulfide Detector Transmitter
5. **Kolkata:** Supplier of Hydrogen Sulfide Detector Transmitter
6. **Hyderabad:** Supplier of Hydrogen Sulfide Detector Transmitter
7. **Ahmedabad:** Supplier of Hydrogen Sulfide Detector Transmitter
8. **Pune:** Supplier of Hydrogen Sulfide Detector Transmitter
9. **Jaipur:** Supplier of Hydrogen Sulfide Detector Transmitter
10. **Lucknow:** Supplier of Hydrogen Sulfide Detector Transmitter
11. **Chandigarh:** Supplier of Hydrogen Sulfide Detector Transmitter
12. **Bhopal:** Supplier of Hydrogen Sulfide Detector Transmitter
13. **Indore:** Supplier of Hydrogen Sulfide Detector Transmitter
14. **Kochi:** Supplier of Hydrogen Sulfide Detector Transmitter
15. **Coimbatore:** Supplier of Hydrogen Sulfide Detector Transmitter
16. **Thane:** Supplier of Hydrogen Sulfide Detector Transmitter
17. **Amritsar:** Supplier of Hydrogen Sulfide Detector Transmitter
18. **Patna:** Supplier of Hydrogen Sulfide Detector Transmitter
19. **Ranchi:** Supplier of Hydrogen Sulfide Detector Transmitter
20. **And more...**

**Middle East and South Asia:**

1. **United Arab Emirates (UAE):** Supplier of Hydrogen Sulfide Detector Transmitter
2. **Saudi Arabia:** Supplier of Hydrogen Sulfide Detector Transmitter
3. **Qatar:** Supplier of Hydrogen Sulfide Detector Transmitter
4. **Oman:** Supplier of Hydrogen Sulfide Detector Transmitter
5. **Kuwait:** Supplier of Hydrogen Sulfide Detector Transmitter
6. **Bahrain:** Supplier of Hydrogen Sulfide Detector Transmitter

**South Asian Countries:**

1. **Sri Lanka:** Supplier of Hydrogen Sulfide Detector Transmitter
2. **Nepal:** Supplier of Hydrogen Sulfide Detector Transmitter
3. **Bangladesh:** Supplier of Hydrogen Sulfide Detector Transmitter
4. **Bhutan:** Supplier of Hydrogen Sulfide Detector Transmitter

**Export Potential from India:**

Explore India's commitment to safety with our Hydrogen Sulfide Detector Transmitters. Spectrum Instruments & Controls ensures the highest standards for international safety protocols.

**Hydrogen Sulfide Detector Transmitter:**

Our state-of-the-art Hydrogen Sulfide Detector Transmitter is designed to safeguard workplaces by providing accurate and timely detection of hydrogen sulfide gas. Key features include:

- **Advanced Sensing Technology:** Ensures precise and reliable detection.
- **Real-time Monitoring:** Continuous monitoring for enhanced safety.
- **Alarm and Alert Systems:** Immediate response to potential threats.
- **Easy Integration:** Seamlessly integrates into safety systems for efficient operation.

Choose Spectrum Instruments & Controls for unparalleled safety solutions. Contact us today for all your hydrogen sulfide detection needs in these cities and countries, contributing to a safer and secure work environment.

SERIES CDT CARBON DIOXIDE/TEMPERATURE TRANSMITTERNDIR CO2 Sensor, Universal Outputs, Optional Relay

The Series CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. For increased sensor accuracy, a single beam dual wavelength nondispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied* and unoccupied buildings against light source aging effects. The single beam dual wavelength sensor technology provides the highest level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions. In order to achieve a higher level of accuracy, the Series CDT includes digital barometric pressure adjustment and the ability to field-calibrate the sensor. For applications that require visual indication, the wall mount configurations of the Series CDT can be ordered with an integral LCD display. Push buttons are standard on all configurations of the transmitters for access to the menu structure, but wall mount configurations can be ordered without the buttons. To prevent tampering, the action of the buttons can be locked out using an internal dip switch selection.

*For buildings occupied 24 hours per day, it is recommended that calibration be verified every 6 to 12 months depending on application.

Single beam dual-wavelength sensor advantages:

• Automatically corrects for aging effects in occupied and unoccupied buildings
  • Perfect for hospitals and manufacturing plants that are occupied 24 hours per day
• Measures actual unfiltered light intensity directly
  • Eliminates error from incorrect assumptions of gas concentration in theoretical logic assumption methods

 

PRODUCT APPLICATIONS

• Demand control ventilation in schools, office buildings, hospitals, and other indoor environments
• LEED® certification

E2608-NH3-E
Ammonia Detector

Features

Stable long-life electrochemical sensor

Range 0...100 / 0...300 / 0...1000 ppm NH3

Resolution 1 / 2 / 5 ppm NH3

Two SPST relays

2 × 4-20 mA or 0-10 V, RS485

Description
Ammonia detector-transmitter E2608-NH3-E is a member of new PluraSens® family of multifunctional measurement instruments.
The instrument is intended for leakage control in refrigeration facilities, warehouses etc. It is not recommended to use the device in spaces with constantly high ammonia concentration such as cattle, pig and poultry livestock houses, since it shortens the sensor lifetime. 

The instrument utilises a fully calibrated and temperature compensated electrochemical gas sensor with excellent repeatability, stability and long lifetime.
Two relays with closing contact may be used for remote signalling or concentration control. Two alarm set-points are user settable.
 
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.